The working principle of broad bean peeling machine

 The working principle of the broad bean peeling machine is: pour the soaked broad beans into the hopper, and vibrate the raw materials into the rotating rubber wheel fixed by three power rollers. Cut the skin of the raw material, and then the discharge wheel presses the peeled broad beans into the discharge hopper, and discharges it from the discharge hopper, and the skin is thrown out through the peeling wheel.



Operation points of broad bean peeling machine

1. Install on a flat ground, fix the anchor screws, or add rubber pads of more than 10mm on the four feet.

2. According to the requirements of the motor, after connecting the power supply, tap the switch to check whether the rotation direction is correct (refer to the label of the large V-belt pulley for the rotation direction). After adding water, turn on the power supply, and the machine will start to work after running for 5 minutes (the machine has been stored for a long time). It must be turned by hand for one to two turns in the correct direction of rotation before turning it on).

3. Before starting the new equipment, it is necessary to re-firm the screws of each part, especially the set screws of each part need to be carefully checked.

4. The bearing must be greased once a week.

5. The equipment must be cleaned and kept clean after the shift.

评论

此博客中的热门博文

What are the small machines for processing peanut butter

Peanut Butter Grinding Machine India Price

How to Make Better-Tasting Peanut Butter